Vaddio WallVIEW CCU 300 Quick-Connect - Manual (Page 7)

Quick-Connect CCU 300
Quick-Connect CCU 300 Installation and User Guide 341-741 Rev. B Page 7 of 12
General Specifications
Quick-Connect CCU 300
Part Numbers Quick-Connect CCU 300 998-6207-000 (NTSC)
Quick-Connect CCU 300 998-6207-001 (PAL)
•
Quick-Connect CCU Interface (QCCU)
Connectors Power Connector: 5.5mm OD x 2.5mm ID
Power RJ-45: Supplies 36V to EZCamera Interface Module Regulator
Control In RJ-45: Accepts RS-232 from ProductionVIEW or other non-daisy-chain control systems
Control Out RJ-45: Passes RS-232 and Sync video feed to camera EZIM
Tally: 2-Pin Phoenix type spring cage connector
Video Inputs: BNC Connector for Sync
Video Outputs: BNC Connectors for SD video (Y-C and Composite)
Video RJ-45: Transports video from camera EZIM
Camera Select Switch For Future Use – All switches should be in the down position
Video Adjustments Y-Gain (luminance gain) for fine tuning over longer cable distances
Distance Compensation: 100’, 200’, 300’, 400’+
CAT-5 Cable Distance Up to 500’ (152.4m)
Power Supply 36 VDC, 2.78 Amp
Dimensions 1-RU Rack Mount - 1.75” H x 19” W x 6” D (4.45 cm x 4.26 cm x 15.24 cm)
• EZCamera Interface Module CCU (EZIM)
Connectors Three (3) RJ-45 Connectors
One DB-25 for Power, Video, Control & Genlock
Cable Assembly For Sony 300 Camera: DB-25M to BNC x 2, 8-Pin Mini Din, 4-pin Mini Din, EIAJ4 Power Connector
Power Regulator Supplies 12VDC to Camera
Dimensions 3” H x 4.5” W x 1.2” D (7.6 cm x 11.4 cm x 3 cm)
•
Thin Profile Wall Mount 300
Materials 12-Gauge CRS with Black Powder Coat Paint
Dimensions 8” H x 8.5” W x 11.5” D (20.3 cm x 21.6 cm x 29.2 cm)
Weight 5.6 lbs. (2.5 kg)