Vaddio WallVIEW HD-18W DVI/HDMI w/CONCEAL - Manual (Page 5)

WallVIEW HD-18 DVI/HDMI
©2011 Vaddio - All Rights Reserved. WallVIEW HD19 DVI/HDMI, Document Number 342-0045 Rev. C Page 5 of 16
Unpacking System Configurations (continued)
WallVIEW DVI/HDMI HD-18 System,
Part Number 999-6906-001 International - Black Camera Kit
Part Number 999-6906-001W International - White Camera Kit

One (1) HD-18 PTZ Camera 999-6900-001 (Black) or 999-6900-001W (White)

One (1) Quick-Connect DVI/HDMI Interface Box

One (1) 24VDC, 2Amp Switching Power

One (1) AC Cord Set for Euro and One (1) AC Cord Set for UK

One (1) Laird Technologies 28A2432-0A2 Clamp-on Ferrite Cylinder (Wrap IR forwarding LED wires twice before
screwing stripped wire ends to 3 conductor Molex Euro Jack)

Two (2) Laird Technologies 28A0640-0A2 Clamp-on Ferrite Cylinder (Clamp around 0.8" diameter shielded DVI
Cable at the Quick-Connect DVI end)

One (1) Laird Technologies HFA163090-0A2 Clamp-on Ferrite Cylinder (Clamp around 0.8" diameter shielded
DVI Cable at the Monitor end).

One (1) 535-2100-100 (Black) or 535-2100-200W (White) CONCEAL Wall Mounting System and Mounting
Hardware

One (1) 998-1001-232 Control Adapter (for control systems)

One (1) 998-1002-232 Control Adapter (for TANDBERG VC systems)

One (1) 3-pos Phoenix type connector

User Manual - Document Number 342-0045
Quick-Connect DVI/HDMI - SR Interface I/O Description
1) Blue LED Power Indicator.
2) 24 VDC Power Port: Coax Power Connector, 5.5mm OD x 2.5mm ID, Positive Center.
3) Recessed Color Space Conversion Switch: Toggles between HDMI YCbCr and sRGB (RGBHV)
color space. Change the color space to accommodate either YCbCr or RGBHV monitors.
4) RS-232 Control Input (from joystick controller, codec or control system).
5) To Camera: RS-232 Control to & from Camera and IR signals returned from the camera.
6) Daisy Chain Control Port: Daisy Chain Control Emulation (DCCE) output to next Quick-Connect
DVI/HDMI SR Interface (does not function with the AutoTrak System).
7) IR Output Port: Non-modulated (for hard connections) and Modulated for use with IR emitters.
8) DVI-D Output: High Definition Multimedia Interface (HDMI) Transmitter, HDMI (v 1.3 with deep
color) and DVI v 1.0 Compliant - use Recessed Color Space Conversion Switch to toggle between
HDMI YCbCr and sRGB (RGBHV) color spaces to suit your monitors
9) YPbPr Output: Analog Component Video Output on DE-15F (HD-15F) Connector, Resolutions up to
1080p/60 with monitor support.
10) EZCamera Power & HD Video Port: Supplies power to camera and returns HD video from the
camera via Cat-5e. Maximum distance on the CAT-5e cable is 100’ (30.5 m).
① ② ③ ④ ⑤ ⑥ ⑦ ⑨ ⑧ ⑩