Vaddio WallVIEW HD-22 and WallVIEW HD-30 - Manual (Page 15)

WallVIEW HD-22 and HD-30 SR Systems
WallVIEW HD-22 and HD-30 SR Cameras Systems - Document Number 342-0643 Rev A Page 15 of 20
General Specifications
Camera PowerVIEW HD-22 PTZ PowerVIEW HD-30 PTZ
Part Numbers 999-6960-000 (North America)
999-6960-001 (Int’l) 999-6970-000 (North America)
999-6970-001 (Int’l)
Zoom 22X Optical Zoom 30X Optical Zoom
Field of View Horizontal: 65.2º Wide End to 3.1º Tele
(16:9 Aspect Ratio) Horizontal: 65º Wide End to 2.2º Tele
(16:9 Aspect Ratio)
Lens Focal Length f=4.3 mm to 94.6 mm / F1.6 - F4.7 f=4.3mm to 129.0 mm / F1.6- F4.7
Image Sensor 1/2.8-Type MOS, 2.2 Megapixel, Progressive Scan
Minimum Illumination Color: 0.4 lux (F1.6, 1/30 sec, 50 IRE, Gain: High),
B/W: 0.04 lux (F1.6, 1/30 sec, 50 IRE, Gain: High)
Video Resolutions HD: 1080p/59.94, 1080p/50, 1080p/29.97/25, 1080i/59.94, 1080i/50, 720p/59.94, 720p/50
SD: 480p/59.97 and 576p/50
Video Output
Formats HDMI (YCbCr for HDMI and sRGB for DVI), Analog Component (YPbPr)
HSDS (Power, Differential HD Video & R$S-232 Control)
Signal to Noise Ratio > 50 dB (AGC: Off)
WallVIEW HD-22/30
SR Quick-Connect Quick-Connect SR
Part Number 998-1105-016
Pan Range Pan: +170 degrees to -170 degrees
Tilt: +90 degrees to -30 degrees
Preset Positions 16 (internal), 6 recalled via Vaddio IR Remote Commander
Image Control Red & Blue Gain, Detail, Chroma, Gamma, Pedestal, Iris, and Gain
(Controls available through RS-232 control and Quick-Connect CCU and Slot Card)
Tally Light Available through RS-232 Control
HD Video Select 16-Position Rotary Switch: Used to set HD Video Resolution Output
Camera Settings 10-Position Dip Switch: Settings for IR Select, Baud Rate 9600, Image Flip, Unpublished Functions
Accessory Slot Cards EZIM HD-SDI Slot Card PN# 998-6900-007,
EZIM CCU Slot Card PN# 999-6900-006 - For Use with Quick-Connect Universal CCU Only
Dimensions/Weight 7.81” (198.37mm) H x 6.67” (169.42mm) W x 7.057” (179.25. mm) D / 5.6 lbs. (2.630835643 kg.)
Quick-Connect SR Interface
Connectors  Power Connector: 5.5mm OD, 2.5mm ID coaxial connector
 Power/Video RJ-45: Supplies power to, and differential HD video from the camera
 Video Output: DE-15 connector for HD Analog Component (YPbPr) video only (No SD Support)
 IR Output: Transmits modulated or non-modulated IR signals - from the camera’s IR receiver
 RS-232 IN RJ-45: Accepts RS-232 from ProductionVIEW or other external control systems
 RS-232 OUT RJ-45: Sends RS-232 from Quick-Connect SR to the camera
Power Supply 24 VDC, 2.0 Amp Switching Power Supply
Dimensions
(H x W x D) 1/3 Rack Size
1.6” (40.64mm ) H x 5.5” (139.7mm) W x 3.25” (82.5500000000001mm) D
Accessory Rack Mount Adapter: 998-6000-002 - Holds three (3) Quick-Connect SR Interfaces
Moon in Front Page Header: Ariel - Moon of the planet Uranus.
A PPENDIX 1: P IN -O UTS FOR THE HD-22/30 C AMERA
Pin YPbPr
1 Pr
2 Y
3 Pb
4 -
5 -
6 Pr GND
7 Y GND
8 Pb GND
9 -
10 -
11 -
12 -
13 -
14 -
15 -