Vaddio WallVIEW PRO Z330 - Manual (Page 6)

WallVIEW PRO Z330 Installation and User Guide 341-907 Rev. A Page 6 of 12
GENERAL SPECIFICATIONS
WallVIEW PRO Z330 System
System Part Numbers 999-6855-000 NTSC
999-6855-001 PAL
• Sony BRC-Z330
Image Device 1/3-type CMOS
Total Picture Elements 2 Megapixels (approximate)
Signal System 1080/59.94i, 1080/50i, 720/59.94p or 720/50p (switchable)
Lens 18x Optical Zoom (72x with digital zoom)
Focal Length f=4.6 to 82.8mm
Minimum Illumination 6 lux (50 IRE, f1.6, +24 dB)
Horizontal Viewing Angle 3.3 to 55.1 degrees
Video S/N Ratio 50 dB
Pan/Tilt Angle -175 to +175 degrees (Pan), -30 to +90 degrees (Tilt)
Quick-Connect Interface
Connectors Power Connector: 5.5mm OD x 2.5mm ID
Power RJ-45: Supplies 36V to EZCamera Interface Module Regulator
IR: 2-Pin Phoenix type spring cage connector
Video Outputs: BNC Connectors for HD Analog Component (Y,PB,PR)
Video RJ-45: Transports HD video from camera
Camera Select Switch 8-Position DIP switch loads camera profiles and IR Forwarding for Polycom and TANDBERG Codecs
Video Adjustments Y-Gain (luminance gain) for fine tuning over longer cable distances
Distance Compensation: 100’, 200’, 300’, 400’+
Compatible Cameras Sony BRC-H700, BRC-Z330, BRC-Z700, EVI-HD1, BRC-300, Polycom EagleEye
Max. Cat. 5 Cable
Distance Up to 500’ (152.4m) for Video Power and Control
Power Supply 36 VDC, 2.78 Amp
Dimensions 1-RU Rack Mount (1.75” H x 19” W x 6” D)
EZCamera Interface Module
Connectors Four (4) RJ-45 Connectors
One DB-25 for Power, Video, Control & IR
Cable Assemblies For Sony HD Cameras: DB-25M to DB-15HD/8-Pin Mini Din x 2/EIAJ4 Power Connector
Power Regulator Supplies 12VDC to Cameras
Dimensions Approx. (3.035” H x 4.46” W x 1.242” D)
• Wall Mount Z330
Materials 12-Gauge CRS with Black Powder Coat Paint
Dimensions 8” H x 8.5” W x 11.875” D (20.3 cm x 21.6 cm x 30.2 cm)
Weight Approx. 4.5 lbs. (2 kg)