Wittco 1401 - Manual (Page 8)

1001 & 1401 OVEN MANUAL F-41206 (12-12)
7
OPERATION
CONTROLS
The Oven and its parts
are hot. Be very careful when operating,
cleaning, or servicing the oven.
All operating controls are located on the
front Control Panel(s). The oven is
supplied with individual operating
controls for each oven cavity.
POWER
THERMOMETER COOKING TIME ON / OFF
KNOB SWITCH
COOKING COOKING
HOLDING HOLDING
TEMP. MODE MODE TEMP.
KNOB LIGHT LIGHT KNOB
Thermometer: Indicates the interior
temperature of the oven.
Cooking Time Knob: Sets the desired
cooking time from ½ hour to 12 hours.
Power ON/OFF Switch: Turns the
oven On or Off.
Cooking Temperature Knob: Sets the
desired cooking temperature.
Cooking Mode Light: Indicates oven is
in Cooking Mode.
Holding Mode Light: Indicates oven is
in Holding Mode.
Holding Temperature Knob: Sets the
desired holding temperature.
BEFORE FIRST USE
The Oven and its parts
are hot. Be very careful when operating,
cleaning, or servicing the oven.
1.
Thoroughly clean the oven
before initial use. Please refer
to cleaning instructions in this
manual.
2.
Test the oven to verify that the
oven operates normally. Please
refer to “Testing The Oven”
procedure in this manual.
TESTING THE OVEN
The Oven and its parts
are hot. Be very careful when operating,
cleaning, or servicing the oven.
Before using the oven for the first time,
verify that the oven operates normally.
1.
Check that the oven is connected
to the correct power source.
2.
Set the COOKING TIME knob
to 0.
3.
Turn the HOLDING TEMP-
ERATURE knob to 140⁰ F.
4.
Set Power ON/OFF Switch to
ON position.
5.
Check that the Oven Circulating
Fan(s) are running.