Beijer Electronics EPC LX nautic EN - Manual (Page 13)

© Elektronik-Systeme Lauer GmbH & Co KG • Kelterstr.59 • 72669 Unterensingen • Tel. (07022) 9660-0 • Fax (07022) 9660-103
0-13
3 Service
Tools All you need to assemble the PC is a 2.0 hexagon socket as well as a
5.5 socket wrench. A small screwdriver and pliers are also helpful (see
illustrations).
Preparation Disconnect the PC from the power supply!
Danger!
Make sure that your electro-static underlay is not able to damage the
front of the EPC.
Open PC Only authorized personnel may perform work on the open PC. Within the
warranty period, the hardware may only be updated with memory and
plug-in cards.
Caution!
The PC contains electronic components that can be disrupted by electro-
static charges.
Therefore, you have to take precautionary measures when opening the
PC. You can find these in the guidelines for electro-statically discharge
sensitive devices (EDSD guidelines).