Beijer Electronics EPC LX nautic EN - Manual (Page 3)

© Elektronik-Systeme Lauer GmbH & Co KG • Kelterstr.59 • 72669 Unterensingen • Tel. (07022) 9660-0 • Fax (07022) 9660-103
0-3
User tips
Please read the manual prior to using for the first time and keep it in a
safe place for future use.
Target group The documented information in this manual refers to the appliance, place
of use, transport, storage, assembly, use and maintenance.
This manual is directed to the following target groups:
• User
• Service technicians/maintenance technicians
Especially observe the chapter „safety instructions and general
instructions“.
Knowledge of PC and Microsoft-operating systems are assumed. General
knowledge in the area of automation technology is recommended.
Diagram convention [Key] Key entries by the user are shown in squared brackets,
for example [CTRL] or [DEL]
italic Names of push buttons to be used, menus or other
screen elements as well as brand names are shown in
italic letters.
Necessary basic knowledge A solid Knowledge of the personal computer and Microsoft-operating
systems is assumed and a general knowledge in the area of automation
technology is recommended.
Approbation’s & standards You will find information in the annex, chapter „certificate and guide
lines“.
Safety instructions Anywhere in the automation equipment, where dangerous errors may
occur, i.e. that an occurring error may cause major material or personal
damage, additional external precautions or facilities have to be made (for
example by means of independent limit switches, mechanical interlocks
etc.), which in case of an error guarantee or enforce a secure operating
condition.
The test and aptitude of the intended usage by the user res. the usage
under operational conditions is the responsibility of the user. Therefore
Elektronik-Systeme LAUER does not assume liability.