Beijer Electronics M70 EN - Manual (Page 27)

Technical Data
Beijer Electronics, MAEN843A 27
Additional enabling switch specifications
The M70 has two 3-position enabling switches.
Parameter Enabling switch
Connection Twin circuit - external connection
Output type Solid-state output
Rated voltage 24 V DC (voltage tolerance 19.2 V DC to 30 V DC according
to EN 61131-2)
Rated current 500 mA (max.)
Max. current up to
output cutoff Circuit 1 1.5 A
Circuit 2 0.8 A
Max. inductive load Circuit 1 145mJ / 1.16 H @ 24 V DC, 500 mA
(comparable with DC13 according to EN
60947-5-1)
Circuit 2 145mJ / 1.16 H @ 24 V DC, 500 mA
(comparable with DC13 according to EN
60947-5-1)
Reverse polarity
protection Circuit 1 Yes
Circuit 2 Yes
Short circuit and
overload protection Circuit 1 Yes (by integration in output-FET)
Circuit 2 Yes (by protective circuit)
Operating cycle 2nd position 105
3rd position
5 x 104
Actuating force From 1st position to 2nd position 5 N typically
From 2nd position to 3rd position 20 N typically