Beijer Electronics M70 EN - Manual (Page 31)

Connection Box
Beijer Electronics, MAEN843A 31
14 Connection Box
The connection box CB211 is used for integration of the M70 in the machine/
system. It is suitable for wall mounting.
The connection box is described below:
Parts of connection box, numbers according to drawing above
1 Status and error LEDs 4 Coninvers female connector for
M70 connection cable
2 PG gland (M20) for voltage supply,
enabling switch and emergency
stop 5 PG glands (M16)for data lines
3 PG gland (M16) for separate func-
tional ground (status as supplied
with dummy plugs) 6 PG glands (M16) for data lines (sta-
tus as supplied with dummy plugs)
70
165
14
0
1
2
3
4
5
6