Fagor B-850A User Manual

Page 8

Advertising
background image

7

1. DESCRIPTION OF THE BLENDER

(Fig. 1)

1. On/off

switch

2. Motor

casing

3. Mixer

base

4. Blade
5. Plug

cable

6. Speed

control

7. Whisk

coupling

8. Whisk
9. Chopper

lid

10. Chopper bowl
11. Chopper blade
12. Graduated jug
13. Multi-purpose jug lid
14. Multi-purpose bowl lid

2. TECHNICAL DATA

B-850A: 800 W
Voltage: 220-240V~50/60Hz

3. SAFETY WARNINGS

Please read this manual carefully
before using the blender for the first
time and keep it handy for any later
consultation. This will ensure that
you obtain the best results with the
maximum safety.

Before using the blender check that
the mains voltage is the same as that
shown on the blender.

If the electricity socket and the blender
plug are incompatible, change the
socket for a suitable one by contracting
a professionally qualified electrician.

We do not advise you to use adapters,
plugs or extension cables. If such a
device is indispensable, use only single
or multiple adapters and extension
cables that comply with current safety
standards, taking care not to surpass
the capacity shown on the adapter and/
or the extension cable.

After unpacking, check that the blender
is in a perfect condition; if in doubt,
contact the nearest Service Centre.

The packaging (plastic bags,
polystyrene foam, etc.) should not be
left within reach of children, as it is a
potential source of danger.

This blender should be employed solely
for domestic use. Use for any other
purpose is considered inadequate and
dangerous.

In the event of the blender breaking
down or malfunctioning, switch it off
and do not attempt to repair it.

If the blender needs repairing, only
use a Service Centre authorised by the
manufacturer and request that original
spares are used. If this advice is not
followed, the safety of the blender may
be compromised.

Do not change the cable. If it is broken
or needs to be changed, contact a
Service Centre authorised by the
manufacturer. Do not use the blender
when the cable or plug is damaged.

The manufacturer will not be liable
for any damage that may arise from
inappropriate, erroneous or improper
use or from repairs carried out by
unqualified persons.

When using any electrical appliance,
certain fundamental rules must be
followed.

ESPECIALLY
• Do not touch or pull the cable with wet

or damp hands or feet.

To prevent electric shocks, do not
immerse the appliance or the cable or
the plug in water or put it under the tap.

Do not touch the blade whilst the
blender is in operation.

The whisk should be fitted or removed
only when the appliance is unplugged.

Do not allow the cable to hang over the
edge of a table or work-surface or to
come into contact with hot surfaces.

Do not pull the cable to unplug the
appliance.

Unplug the blender when it is not in
use, before fitting or removing the mixer
base and before cleaning it.

Do not allow children to use the
appliance.

EN

Advertising