Fagor B-515M - Manual (Page 9)

positioning marks and pressing it into the
motor body (3) until you hear a click. (Fig.2)
NOTE: To remove the blender stem, press
the removal button (14).
After adjusting the blender stem (4), plug in
the appliance. Place the food you wish to
blend in a suitable container, and position
the blender as shown in figure 7. Press the
On/Off switch (1). On models B-615M and
B-675 MA, select the speed by turning the
speed controller (7). If you wish, you may
press the turbo button (2) to blend at top
speed.
IMPORTANT: Do not use the plastic
blender stem (model B-415 P only) to
blend any food at a temperature of over
60ºC.
Egg white beating function (mod.
B-575MA, B-675MA)
Insert the egg white beater into the blender
coupler until it fits into place (fig.5). Then
fit it to the blender body by aligning the
positioning marks and pressing it in until
you hear a click (fig. 6). Place the blender
in the container, plug in the appliance and
press the On/Off button to start beating
the egg whites. Use the speed controller to
select a speed (models B-615M and B-675
MA), or press the turbo function button.
You may use the glass (13) or another type
of container for beating the egg whites.
Mincing function (mod. B-575 MA, B-675 MA)
The mincer can be used for fruit and nuts,
herbs, boiled eggs, dry bread, etc.
Place the mincer blade (12) in the centre of
the bowl (fig. 3). Place the ingredients you
wish to mince in the mincer bowl.
Place the mincer lid (10) on the mincer jug,
making sure it is correctly aligned with the
mincer blade. Insert the motor body (3) in
the mincer lid (3) by aligning the positioning
marks and pressing it in until you hear a
click (Fig. 4). Plug in the appliance and
press the On/Off button. Use the speed
controller (7) to select a speed (models
B-615M and B-675 MA only) or press the
turbo button (2) for quicker mincing. When
you have finished mincing the food, make
8
come into contact with hot surfaces.
• Do not pull the cable to unplug the
appliance.
• Unplug the blender when it is not in use,
before fitting or removing the mixer base
and before cleaning it.
• Do not allow children to use the
appliance.
• Before connecting the blender, ensure
that the mixer base is correctly fitted to
the appliance.
• Do not use or place any part of the
blender on or near to hot surfaces (gas
or electric hotplates or ovens).
• This appliance should not be used
by physically, sensorially or mentally
handicapped people or people without
experience or knowledge of it (including
children), unless they are supervised or
instructed in the use of the appliance by
a person responsible for their safety.
• Children should be watched to ensure
they do not play with the appliance.
• For greater protection, we recommend
installing a residual current device (RCD)
with an operational residual current not
exceeding 30 mA. Ask your installer for
advice.
Preparing for use
This blender is designed to process small
quantities of foodstuff and should not be
used for any other purpose.
Before using for the first time, clean the
casing of the motor with a damp cloth.
Wash the shaft and the blade in hot, soapy
water; do not immerse the upper part of the
shaft. Dry all the pieces thoroughly.
IMPORTANT: Before fitting or removing any
of the parts of this blender, unplug it from
the mains.
Blender function
The blender can be used to blend
light foods, for making sauces, soups,
mayonnaise or puree, for example. Insert
the blender stem (4) by aligning the
4. OPERATION