Description (fig. 1), Technical characteristics 4. electrical connection, Safety warnings – Fagor TRV-320 User Manual

Page 6: Operation and use

Advertising
background image

5

EN

1. DESCRIPTION (Fig. 1)

A. Function selector

B. Temperature selector

C. Light

D. Air flow grill

E. Cable tidy

2. TECHNICAL CHARACTERISTICS

4. ELECTRICAL CONNECTION

Wattage:

TRV-320: 2000 W

TRV-420/ TRV-520: 2400 W

Voltage: 230 V~50 Hz

3. SAFETY WARNINGS

Leave at least 1 metre between the

appliance and all furniture, sofas etc.

which could be close to the appliance.

Do not switch the appliance on when

resting on walls, furniture, etc.

IMPORTANT This appliance must never

be used in the bathroom or in any other

place where it could get wet.

Only use the appliance in horizontal

position.

Do not use it to dry clothing or obstruct

the air flow grill, to stop the appliance

from over-heating.

The users should not replace the power

cable. This operation should only be

done by authorised personnel.

Do not fit the appliance directly under a

plug socket.

Do not cover the appliance during

operation to avoid reheating and

fire risks.

Do not use the appliance in a room

which is smaller than 4 m

2

.

• This appliance is not designed for

use by people (including children)

with reduced physical, sensory or

mental abilities, or those with lack of

experience or knowledge, unless they

are supervised or instructed on the use

of the appliance by a person responsible

for their safety.

• Children are not aware of the dangers

of electrical appliances. It is therefore

necessary to supervise them when they

are using the appliance!

• Do not cover the air inlet or outlet

when the appliance is operating.

A

safety device interrupts the operation

of the air handling unit in the event of

accidental

overheating (e.g.: obstruction

of the air flow grill, motor not turning, or

turning slowly). In order to re-establish the

operation, unplug the appliance for a few

minutes, eliminate the cause of overheating

and plug it in again. If the appliance still

does not operate normally, please contact

an authorised Technical Assistance Centre.

Before plugging in the appliance for the

first time, make sure that the electrical

network voltage has the same value in V

(volts) as indicated on the characteristics

plate.

Make sure that the plug socket has

capacity for 10/16 amps.

This appliance is adjusted to the

CEE 89/336 directive relating to

electromagnetic compatibility.

5. OPERATION AND USE

On:

Choose the programme that you wish to

use by turning the function selector

(A) to

the chosen position:

Position

1000 mm

1000 m

m

1000 m

m

2250

mm

: Summer service

In this position the appliance will operate

as a cold air fan.

Position 1: Low power heating.

Position 2: High power heating.

Turn the temperature selector

(B) to the

maximum to switch the annexe on. Then

the light

(C) will come on indicating that the

appliance is on.

Advertising