Audiovox P-99A - Manual (Page 13)

CD CHANGER ERROR CODES
If a problem should develop while operating the CD changer, the following error codes may appear on the display panel.
EJEC: Indicates that there is no magazine loaded in the CD changer.
ER-1: Indicates an error in the microprocessor control of the CD changer. Eject the CD magazine from the changer and make sure
the discs are clean, undamaged, and loaded correctly (see Owner’s Manual of the CD changer). Re-load the magazine and
check for proper operation. You may also try activating the Re-Set button dl
on the unit, but this will also erase the time and
pre-set memories.
ER-2: Indicates a CD changer mechanism error. Try ejecting and re-loading the CD magazine into the changer.
ER-3: Indicates excessive temperature conditions at the CD changer. The error sign will go off and play will resume when the
temperature at the changer returns to a normal range.
If the suggested measures do not solve the problem, contact an approved warranty station near you for further assistance.
-12-
du
TRACK/DISC SHUFFLE (SHF)
When the Shuffle button is pressed, the SHUFFLE indication will
appear on the display panel and the tracks on the disc will be
played in a random, shuffled order. The Track Select button dq
will also select tracks in the shuffled order instead of the normal
progression. The Track Shuffle mode can be canceled by pressing
the Shuffle button again or by activating the Repeat
dt
or Scan el
functions.
When the Shuffle button is pressed and held longer than 2 seconds,
the
DISC and SHUFFLE indications will appear on the display
panel and the discs in the magazine will be played in a random,
shuffled order, as well as the tracks on each disc. When all tracks
on the selected disc have been played, the next disc will be
selected in shuffled order and its tracks will be played in shuffled
order. The Disc Shuffle mode can be canceled by pressing the
Shuffle button again or by activating the Repeat
dt
or Scan
el
functions.
el
TRACK/DISC SCAN (SCN)
When the Scan button is pressed, the SCAN indication will
appear on the display panel, and the first 10 seconds of each
track on the disc will be played in order. When a desired track is
reached, press the Scan button again and play of the selected
track will continue (
SCAN will disappear from the display panel).
The Track Scan mode will also be canceled by activating any other
disc function (Select, Cue/Review, Shuffle or Repeat).
When the Scan button is pressed and held longer than 2 seconds,
the
DISC and SCAN indications will appear on the display
panel and the first 10 seconds of the first track on each disc in the
magazine will be played. When a desired disc is reached, press
the Scan button again and play of the selected disc will continue
(
DISC and SCAN will disappear from the display panel). The
Disc Scan mode will also be canceled by activating any other disc
function (Select, Cue/Review, Shuffle or Repeat).