Fagor FET-5112 - Manual (Page 16)

4 / PROGRAMMING YOUR MACHINE EN
16
• SOME EXAMPLES OF PROGRAMMES
To select the most suitable programme for your type of washing, follow the instructions on the labels that most textiles bear.
: These functions can be used alone or in combinations: no illogical combinations can be made.
Important:
* The cycle times are provided for an average value “without options”. They may vary according to the wash load, the temperature, etc.
— If you programme a “Prewash”, you must add 18 to 25 minutes.
— If you programme “Extra rinse”, you must add 17 minutes.
• TEST PROGRAMMES ACCORDING TO DELEGATED REGULATION (EU) No. 1061/2010
- Standard cotton programme at 60°C: cottons 60 °C : no option - max spin
- Standard cotton programme at 40°C: cottons 40 °C : no option - max spin
• DETAILS OF THE PROGRAMMES
The main programmes provided by the machine are as follows:
• COTTON
If your washing comprises hard-wearing white or coloured COTTONS.
Important:
When washing coloureds do not exceed a maximum temperature
of 60°C.
NB: During the first few minutes of the programme, your machine
automatically evaluates the washing load you have introduced and adapts
the water consumption and the length of the programme accordingly to
provide a perfect wash.
• SYNTHETICS
If your washing comprises of DELICATE COLOURS, HARD-WEARING
SYNTHETICS or MIXED FIBRES.
• PREWASH COTTON
Specially designed for heavily soiled washing (mud, blood, etc.).
A specific initial agitation in cold water precedes a phase of heating to 40°C.
This agitation phase in cold water enables the particles soiling the washing
to be removed before the water is heated.
Important:
Detergent must be placed in the « » container in the products
box.
• DELICATES / WOOLLENS
If your washing comprises NETTING, DELICATE FABRICS, FRAGILE
TEXTILES or «MACHINE-WASHABLE WOOLLENS».
NB: A programme with agitation and spin phases specially adapted to these
types of fabrics.
• HAND WASH
If your washing comprises SILK or PARTICULARLY DELICATE FABRICS.
NB: A programme with a very gentle mechanical action and no intermediate
spins between rinses.
The cycle ends with a very gentle, progressive spin restricted to 600 rpm.
• Rinse only
A separate rinse followed by a choice of:
— Either spin and drain
— Or drain only («Drip-dry» option)
— Or a stop with the drum full of water.
• Spin only
This allows a separate spin and drain.
Important:
In the case of «Rinse only» followed by a spin or «Spin only»,
ensure that you select a suitable spin speed for the type of washing in
the machine.
• Flash 30min
This programme enables you to refresh a small load of 2.5 kg of lightly
soiled washing composed of WHITES, COTTONS, COLOUREDS or
HARD-WEARING SYNTHETICS.
The cycle time is restricted to around 30 minutes.
In this programme, the washing temperature is automatically programmed
at 30°C.
Important:
For this programme, the doses of detergent should be reduced
by half.
• Maintaining your machine’s performance (Maintaining the pump filter) :
You must clean the drain pump filter regularly (for how to do this, see the section «CLEANING THE PUMP FILTER»).
Important:
Your machine’s performance can be affected if you do not clean the pump filter regularly.
Programmes table «100»
Programmes table
Temperature
(°C)
Maximum
weight of
dry clothes
(kg)
Cycle
length *
h = hour
min = minute Reducing the time Extra rinse
Anti
creasing Drip-dry
Full drum
stop
COTTON - 90 5.0 1h 26 - 2h 24
SYNTHETICS - 60 2.5 1h 19 - 1h 41
PREWASH COTTON 40 5.0 1h 55 - 2h 40
DELICATES / WOOLLONES - 30 1.5 32 min - 41 min
HAND WASH 1.0 32 min
Additional programmes
Spinning - - 18 min
Rinsing - - 10 min
Flash 30 min 30 2.5 30 min
OptiA 45 min 40 3.0 45 min