MIPRO ACT-7H Handheld Transmitter - Manual (Page 2)

1
(Figure 1)
Top Grille: Protects detachable microphone
capsule module and internal foam prevents
breathing, wind and POP noises.
Upper Housing: Houses transmitter PCB and
battery compartment.
CD Screen: Displays group, channel, battery
status and error code.
Lower Housing: Protects battery compartment
and holds batteries.
Power On-off Switch: Slide the power switch
to the “ON” position for use or to the “OFF”
position when not in use.
Color Coded Protection Cap: Protects against
accidental power on/off. Available in different
colors for channel differentiation.
ACT Infrared (IR) Port: Receives signals from
receiver to synchronize frequencies.
Battery Compartment: Accommodates two 1.5
Volt (AA) batteries.
L
PART NAMES AND FUNCTIONS
1 2 3 4 5 6
7 8
GROUP CHANNEL BAT
1
2
3
4
5
6
7
8
Handheld Transmitter
2
KEY FEATURES:
 Rugged magnesium alloy construction.
 Patented rear housing design protects accidental
power on/off and built-in antenna from breakage.
 Bright LCD display shows group, channel, battery
status and error code.
 Ten different rear caps to visually identify a
particular microphone channel on stage.
 World's first ACT function uploads the selected
receiver frequency into the transmitter
automatically and rapidly.
 Interchangeable condenser or dynamic
microphone capsule. Upper grille allows quick
removal for cleaning and replacement.
 Hyper-cardioiod directional condenser capsule
exhibits high fidelity, dynamic range, fast
transient responses, low feedback characteristics.
 High SPL inputs avoid distortion.
 High efficiency circuitry and sophisticated PCB
design with extended battery hours.
Handheld Transmitter