Rhin-O-Tuff HD7500 - Manual (Page 7)

5
Placing your machine in the proper location:
u Before lifting machine, turn power off and remove
the power cord from the wall outlet. The machine
is very heavy! Never attempt to lift the machine
by yourself. Two people will be needed to lift the
machine.
u Place the machine on a hard level surface, place the foot pedal on the
floor in front of the machine. Ensure the placement of machine allows
for ergonomic work flow (separate locations for un-punched books and
a punched books).
u
u
u
Connect the foot-pedal cord into the foot-pedal
receptacle on the back of the machine, do not
attempt to connect foot-pedal into anything other
than the foot-pedal receptacle.
comes with a palm-switch that can be
used of the foot-pedal. Decide which
device you want to use to activate the machine and
connect that device into the foot-pedal receptacle
on the back of the machine.
paper activated switches are available for
these punches. These switches replace the foot-
pedal or palm switch and plug into the foot-pedal
receptacle on the back of the machine.
HD7700
Optional
instead
Lifting Hazard
Single person
lift could result
in injury.
Two person lift required.
! CAUTION
u Turn power switch off before maintaining or
changing die assembly.
! WARNING
Crush hazard.
Keep hands away
from moving parts.
Lockout and disconnect
power before servicing.
u Use of appropriate hand protection should be
utilized to avoid injury from handling of materials. ! CAUTION
Cutting Hazard
Injury to fingers
and hands.
Use hand protection
! CAUTION
Tripping Hazard
Bodily injury could
occur from fall.
Route cables away
from walkways
u Follow all recommended workplace procedures for repetitive activities.