KEMP Hyper-V 2008 R2 - Manual (Page 16)

Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 16 / 18
Virtual LoadMaster for Microsoft Hyper-V
Installation Guide
3. Select the current host from the list for migration.
4. Click Yes to the prompt asking if you want to make the Virtual Machine highly available.
5. The path can be changed if needed. Click Next.
6. Select the network and click Move.
7. Wait for the migration to complete.
3.5 Factory Reset
If you perform a factory reset on the VLM, all configuration data, including the VLM’s IP address
is deleted. During the subsequent reboot the VLM attempts to obtain an IP address via DHCP. If
the VLM is on a different subnet to the DHCP server then an IP address will not be obtained and
the IP address is set to the default 192.168.1.101.
The VLM may not be accessible using this address. If this is the case then you must run through
the quick setup via the console as described in Section 3.1