Loadmaster for fujitsu installation – KEMP PRIMERGY RX User Manual
Page 11
Advertising
Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 11 / 15
LoadMaster for Fujitsu Installation
Installation Guide
Figure 2-11 Default gateway screen
28. In the DNS configuration screen, enter the IP address of the default gateway into the
IPv4 Default Gateway Address input field.
If you have an IPv6 Default Gateway, please enter the value in the IPv6 Default Gateway
Address input field.
29. Click the Set IPv4 Default Gateway button.
The LoadMaster is now fully installed and ready to be used. For further information on how to
configure and implement the Virtual LoadMaster, please refer to the LoadMaster
documentation which can be downloaded from the
page.
Advertising