Myron L PH1 User Manual
Page 3
FEATURES and SPECIFICATIONS
A. Features
• Superior resolution 3 1/2 digit LCD
• Accuracy of ± .05 pH units
• All electrodes are internal for maximum protection
• Latest sensor technology
• Water resistant
• Easy calibration
• Temperature Accuracy of ±1° C/F
B. General Specifications
Display
3 1/2 Digit LCD
Dimensions (LxWxH)
7.7x2.7x2.5 in.
196x68x64 mm
Weight
10.8oz./310g
Case Material
ABS
pH Sensor Well Capacity
0.04 oz./1.2 ml
Power
9V Alkaline Battery
Battery Life
>100 Hours/5000 Readings
Operating/Storage Temperature
32-132°F/0-55°C
Protection Ratings
IP64/NEMA 3
C. Specification Chart
D. Warranty/Service
The pH1,
has a 2 year warranty excluding
the pH sensor
which
ha
s a
limited 6 month
warranty. If an instrument fails to operate properly, se
e
Troubleshooting
Chart, pg. 12. The battery and pH sensor are user-replaceable
For other
service, return the instrument prepaid to the Myron L Company.
If, in the opinion of the factory, failure was due to materials or
workmanship, repair or replacement will be made without charge. A
reasonable service charge will be made for diagnosis or repairs due to
normal wear, abuse or tampering. This warranty is limited to the repair or
replacement of the pH1 only. The Myron L Company assumes no other
responsibility or liability.
E. TechPro™ Series Models
Additional information available on our web site at:
www.myronl.com
TechPro Series Models
pH1
AR1
ARH1
Parameters
pH
Conductivity or TDS, Conductivity or TDS,
& Temperature & Temperature pH & Temperature
2
3
MYRON L COMPANY
2450
Impala Drive
Carlsbad, CA 920
1
0
USA
760-438-2021
pH1
pH
Temperature
Range
0-14 pH
0-71° C
32-160° F
Resolution
.01 pH
0.1° C/F
Accuracy
±.05 pH
±1.0° C/F
Auto Temperature 0-71° C
Compensation
32 - 160° F