j5 create JUH450 USB 3.0 HDMI & 3-Port HUB - Manual (Page 11)

10
Note:
1. The speakers are numbered according to the number if USB ports detected by your
computer system.
2. The Default sound will output from the USB 3.0 HDMI Display Adapter with the greatest
number of USB ports.
3. To change the default sound output, use your mouse to right click in the sound options box
on your desktop, then select “Test” to choose which speaker you want to use as your
default.
4. Select the Speaker you want and then click “Set Default”
Setup The Sound on XP
Microsoft’s audio system restricts the audio function to one output at a time; therefore, when
using the USB HDMI multi-display adapter only one output will receive audio.
The following explains how to set-up and change the default sound output from the display
device connected with the USB 3.0 HDMI Display Adapter.
1. Go to “Control Panel> Sounds, Speech, and Audio Devices” and select “Changes the
speaker settings”.