Meteor C-80 DMX Controller - Manual (Page 4)

SCENES DON’T RUN AFTER RECORDING THEM
MAKE SURE TO PRESS MIDI / ADD BUTTON BEFORE
PRESSING SCENE BUTTON. LED’s SHOULD FLASH
AFTER PRESSING EACH SCENE BUTTON.
BE SURE YOU ARE IN THE CORRECT BANK THAT THE
SCENES WERE RECORDED IN.
SCENES DON’T RUN CORRECTLY AS RECORDED
MAKE SURE ALL FIXTURES WERE RECORDED IN SCENE
MAKE SURE YOU ARE IN THE CORRECT BANK THAT THE
SCENES WERE RECORDED IN
CHASES DON’T RUN AFTER RECORDING THEM
MAKE SURE TO PRESS THE MIDI/ADD BUTTON AFTER
PRESSING THE SCENE BUTTON. LED SHOULD FLASH
AFTER PRESSING MIDI / ADD.
BE SURE YOU ARE IN THE CORRECT CHASE THAT HAS
THE STEPS RECORDED IN
IF IN AUTO MODE – DID YOU ADJUST SPEED AFTER
SELECTING AUTO
FADE TIME IS TOO LONG FOR SPEED SELECTED
FIXTURES AREN’T DOING ANYTHING
HAVE YOU READ THIS MANUAL COMPLETELY AND
FOLLOWED ALL THE RECORDING STEPS FOR
SCENES AND CHASES
DID YOU SET YOUR DIP SWITCHES ACCORDING TO THIS
MANUAL
ARE ALL UNITS PROPERLY CONNECTED WITH POWER
ON AND PROPERLY CONNECTED VIA DMX.
FOR TECHNICAL HELP / SUPPORT
MLSC Inc. MLSC Inc. MLSC Inc. MLSC Inc.
8000 Madison Pike, Madison, Alabama 35758
Tel (256) 461–8000 Fax: (256) 461–7708
Website: meteor-global.com e-mail: [email protected]
7/8 8/8