Martin Universal Design U-280N PRIMA ADJUSTABLE DISPLAY EASEL User Manual

Page 2

Advertising

Martin Universal Design, Inc.

4444 Lawton Avenue, Detroit, MI 48208 U.S.A.

Tel:(313)895-0700 • Fax:(313)895-0709

Martin Universal Design, Inc.

4444 Lawton Avenue, Detroit, MI 48208 U.S.A.

Tel:(313)895-0700 • Fax:(313)895-0709

STEP (1)
Attach rubber tips to ends of
lower legs (D, E, F) tap lightly
with a hammer if needed.

STEP (2)
Position all 3 legs (upper legs
A, B, C) at the top (G) and se-
cure with 3" bolt, washer and
wing nut.

STEP (3)
Position 3 leg posts (lower
legs D, E, F) to desired height.
Insert 2" bolt through each leg
and secure at back with one
washer and wing nut on each
bolt. One end of chain must
be attached to back bolt be-
fore securing with washer &
wing nut.

STEP (4)
Attach canvas holder and
pressure bar (H) with 3" bolt.
Place other end of chain over
bolt, secure with wing nut.

PLEASE NOTE: All holes are
drilled to close tolerances for maxi-
mum rigidity. It may be necessary
to tap bolts in place with a hammer.

PERIODIC RE-TIGHTENING
OF EASEL WILL ASSURE A

STURDY PRODUCT.

MARTIN UNIVERSAL DESIGN, INC.

U-280N ADJ. ART/DISPLAY EASEL

ASSEMBLY INSTRUCTIONS