Goulds Pumps AF (Axial Flow) (42"/1200mm/54/60"/66") LM/LMR Bearings - IOM" - Manual (Page 3)

AF (42-66) IOM 3
FOREWORD
This manual provides instructions for the Installation, operation, and maintenance of the
Goulds Axial Flow (AF) pump model. This manual covers the standard product. For special
options, supplemental instructions are supplied. This manual must be read and understood
before installation and start-up.
The design, materials and workmanship incorporated in the construction of Goulds pumps
makes them capable of giving long, trouble-free service. The life and satisfactory service of any
mechanical unit, however, is enhanced and extended by correct application, proper installation,
periodic inspection, condition monitoring and careful maintenance. This instruction manual was
prepared to assist operators in understanding the construction and the correct methods of
installing, operating, and maintaining these pumps.
Goulds shall not be liable for physical injury, damage or delays caused by a failure to
observe the instructions for Installation, Operation, and Maintenance contained in this
manual.
Warranty is valid only when genuine Goulds parts are used.
Use of the equipment on a service other than stated in the order will nullify the warranty,
unless written approval is obtained in advance from Goulds Pumps, Inc.
Supervision by an authorized Goulds representative is recommended to assure proper
installation.
Additional manuals can be obtained by contacting your local Goulds representative or by
calling 1-800-446-8537.
THIS MANUAL EXPLAINS
 Proper Installation
 Start-up Procedures
 Operation Procedures
 Routine Maintenance
 Pump Overhaul
 Trouble shooting
 Order Spare or Repair Parts
When pumping unit is installed in a potentially explosive atmosphere, the instructions after the Ex symbol
must be followed. Personal injury and/or equipment damage may occur if these instructions are not
followed. If there is any question regarding these requirements or if the equipment is to be modified,
please contact a Goulds representative before proceeding.