Nyrius Digital Translator User Manual

Page 2

Advertising
background image

TO VIEW WORLD TIME
In Home Time mode, press ▼ or ▲ to view World Time and Calendar for 24 cities.

Moscow (MCW) – Karachi (KHI) – Bangkok (BKK) – Jakarta (JKT) – Beijing (BEI) – Hong Kong (HKG) – Tokyo (TYO) – Seoul (SEL) –

Sydney (SYD) – Wellington (WLG) – Honolulu (HNL) – Los Angeles (LAX) – Denver (DEV) – Chicago (CHI) – Mexico City (MXC) – New York
(NYC) – Toronto (TOR) – Rio de Janeiro (RIO) – London (LON) – Paris (PAR) – Rome (ROM) – Berlin (BLN) – Frankfurt (FRA) – Cairo (CAI)

TO ENABLE DAILY ALARM

1.

Press MODE (4) until the screen shows “ALARM -- : --“ , then press ENTER (7) to enable the alarm function.

2.

When hour digit blinks, press ▼ or ▲ to set Hour and Minutes (◄ and ► to shift position) then press ENTER (7) to confirm.

TO DISABLE DAILY ALARM

1.

Press MODE (4) until the screen shows the ALARM Time.

2.

Press ▼ or ▲ to disable the alarm function.

TO STOP ALARM SOUND

1.

When the alarm time is reached, the alarm will sound for 60 seconds. Press any key to stop the alarm sound.

2.

The alarm will sound again at same time each day until cancelled.

TO STORE DATA FILE

1.

Data File is capable of storing a maximum of 60 phone numbers.

2.

Press MODE (4) until the screen shows the DATA FILE, then press ENTER (7) once so that the left cursor blinks.

3.

Press ▼ or ▲ to search from A~Z, a~z and 0~9, (◄ and ► to shift position) then press ENTER (7) to confirm.

4.

NO. will appear in the right corner and the left cursor will blink, press ▼ or ▲ to search and input numbers.

5.

It is recommended that all phone number data are stored in hard copy to prevent data loss.

TO SEARCH DATA FILE RECORDS

Press MODE (4) until DATA FILE is reached, then press ▼ or ▲ to search through records, press ► to view the phone number.
TO EDIT RECORDS

Search to the desired record, press ENTER (7) once, the left character will blink, then use ▼ or ▲ to correct, ◄ and ► to shift position then
press ENTER (7) to confirm.
TO DELETE STORED RECORDS

When the stored record is shown, press CLEAR (8) once and select YES (▲) or NO (▼) to delete the stored record.

TO ENABLE PASSWORD LOCK

1.

Press MODE (4) until the screen shows LOCK?_ _ _ _.

2.

Use ▼, ▲, ◄ and ► to enter a 4-digit password, then press ENTER (7) to confirm locked.

TO TEMPORARILY UNLOCK

1.

If Data File is locked, a “LOCKED” message will be shown on the display when the MODE (4) key is pressed to Data File.

2.

Input the 4-digit password then press ENTER (7), Data File will then be temporarily be unlocked.

3.

After viewing or editing the record(s), DATA FILE will lock again.

TO PERMANENTLY UNLOCK

1.

Press MODE (4) until the screen shows “UNLOCK? _ _ _ _”.

2.

Input the 4-digit password, and the lock will be permanently removed until next time you set a password.

RESET

If the LCD display malfunctions, press RESET (11) key located on the back of the case to reset the translator.
CAUTION: PERSONAL SET UP AND ALL STORED PHONE DATA WILL BE PERMANANTLY ERASED.

WARNING

In an environment with high electrostatic discharge, the product may not operate normally. It may be necessary to reset the unit.

INSTRUCTIONS FOR ATTACHING THE NECK STRING

1.

Press both sides of the clasp to detach from neck string.

2.

Slide neck string loop through the slot at the bottom of unit.

3.

Push the clasp though the neck string loop and pull tight.

4.

Connect the clasp to the neck string again

EARPHONE INSTALLATION (optional accessory) (15)

1.

Plug the earphone into the socket which is located at the bottom of left corner (

).

2.

Turn the Volume to LOW to avoid any harm to hearing.

BATTERY INSTALLATION (13) & (14)

This translator is operated by two Lithium batteries #CR2032. Batteries should be replaced when display looks dim or voices become distorted.
For your convenience, 2 extra batteries have been included in the package.
To insert or replace the batteries,

turn the power off and do not press any button, move the case back battery door lock to OPEN, slide the

battery door away, insert two pieces fresh batteries, making sure that polarity is correct, put the battery door back to the main unit then shut the
battery door lock firmly.

To retain phonebook records in Data file, battery replacement process must be completed within 60 seconds.

Alternatively, you can save the data elsewhere at your own choice.

WARNING - DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD

T

his product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just

2 hours and can lead to death.

Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and

keep it away from children.

If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Advertising