Edsal MRWB-4 User Manual
Heavy duty 4’ 1 drawer work bench
Safety Instructions
Safety Instructions
Safety Instructions
These units should be placed on a level surface. Failure to do so can result in poor product performance or create a
possible safety hazard. This unit should be securely anchored to a wall or floor with suitable fasteners, which are not
included. Do not use this unit for anything other than the manufactures intended purpose. DO NOT STAND ON ANY
PART OF THE UNIT, OR USE IT AS A LADDER. Evenly distribute the weight on each level and always keep the
heavier loads on the bottom. Use care when working with metal parts.
Heavy Duty 4’
1 Drawer Work Bench
MODEL NUMBER
MRWB - 4
MRWB
MRWB
MRWB
-
-
-
4 3 Shelf 1 Drawer
4 3 Shelf 1 Drawer
4 3 Shelf 1 Drawer
-
-
-
60”h x 24”d x 48”w
60”h x 24”d x 48”w
60”h x 24”d x 48”w
Description
36” Post (Top Back)
36” Post (Bottom Front)
Brace
Beam
24” Post (Bottom Back)
Top Shelf Support
Drawer Mount
Drawer Slide
Drawer Shelf Braces
Peg Board
Wood Shelf
Wood Drawer Shelf
Wood Top Shelf
Hardware
Qty.
2
2
4
5
2
1
2
2
2
1
2
1
1
4
Part Number
HWPT3602T
HWPT3602
RWBE2303
RWBE4703
HWPT2402
RWSS4803
RWDM2305
RWDS2003
RWDB4302
PGBD4820
RLPB2448
RPB43017
RPB2489
NB4
Part Size
36”
36’
24”
48”
24”
48”
N/A
N/A
43”
20” x 48”
24” x 48”
17” x 43”
9” x 48”
#10-24
General Instructions
General Instructions
General Instructions
Assembly is done with the rivets of the beams and braces fitting into the slots of the post. A rubber mallet may be used
on the beams and braces to seat the rivets properly. A hammer can also be used, providing one uses a cloth or a block
of wood between the hammer head and the parts to prevent damage. Tap gently and be sure the rivets are straight and
fully engaged.
Should you have any comments, damage, missing parts, or problems with assembly of this unit please feel
free to contact our Edsal manufacturing facility at, (773) 475-3000 and request customer service. We can
also be reached on the internet at the following email address : [email protected].
To obtain replacement parts, please provide the following information :
- Model # - Part # & Description - Location Purchased - Date Purchased
Consumer Products Division
Edsal Manufacturing Company
4400 South Packers Avenue
Chicago, IL 60609 www.edsal.com
Heavy Duty Work Bench