Rugged ridge limited warranty, 06 tj gas tank skid plate – Rugged Ridge Gas Tank Skid Plate, 97-06 Jeep Wrangler (TJ) User Manual
Page 3
18003.22
97-06 TJ GAS TANK SKID PLATE
10.
Locate 2 axle vent hoses and zip tie hoses to fuel filler neck. Also,
reconnect the grounding strap to the driver side shock mount if
applicable. Hold filler neck in position and reinstall 8 screws to secure
the filler assembly to the vehicle. Reconnect the fuel filler and overflow
hoses to the tank if they were detached prior to lowering the tank.
11.
Reconnect vehicle wires to the battery terminals. Attach negative terminal wires last. Once all wires are
connected and installation is complete, start engine. You may need to pump the gas pedal a few times to get
fuel through the lines and to the engine. Once started, check all fuel lines for leaks.
Rugged Ridge Limited Warranty
Applies to Rugged Ridge Products by OMIX-ADA Inc.
Please find warranty card supplied with product for more information. Warranty card
should be filled out and returned to address listed below.
OMIX-ADA Inc.
460 Horizon Dr. Suite 400
Suwanee, Georgia 30024
Page 2 of 3