Rugged Ridge Body Tub Rail, Body Armor, 97-06 Jeep Wrangler (TJ) User Manual

Page 2

Advertising
background image

Page 2 of 2

11650.4X

Rugged Ridge Off Road (the Company) warrants to the original purchaser of this product that should the product or any part thereof, under normal
use and conditions, be proven defective in material or workmanship within 12 MONTHS from the date of original purchase, such defect(s) will be repaired
or replaced or credited at the Company's sole option.

To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. Dated bill of sale),
specification of defect(s) to the place of purchase or, with prior approval from the Company (Return Authorization Number is required), freight pre-paid
to the Company address listed below.

This warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration,
improper installation, mishandling, misuse, neglect, accident or by acts of nature. THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS
WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY
EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.

This Warranty is in lieu of all express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERHCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN THE PERIOD OF
12 MONTHS FROM DATE OF ORIGINAL PURCHASE.

IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY
OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the Company any liability
other than expressed herein in connection with the sale of this product.

Some States do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage, so the
above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.

LIMITED 12 MONTH WARRANTY

Applies to Rugged Ridge by Omix-Ada Inc. Products

Omix-Ada Inc.

460 Horizon Dr. Suite 400

Suwanee, Georgia 30024

04-30-09

4. Repeat steps 1-3 for other side

Note - Do not wash vehicle for 24 hours following installation.

1. For TJ application where a Bestop Supertop has been installed modifications to the 11650.41
Body Tub Rail Covers will be needed. The 11650.41 covers have been molded with a cut line near
the front section of the cover. Using shears or box knife cut along molded line. Check fit to body tub.
With rail in position make rear most mounting hole for Bestop Supertop doorframe bracket. Using
the marked hole as a guide drill a hole into cover that matches the hole size of the Bestop Supertop
bracket. Cover can be marked from underside of the tub rail. With rear mounting hole drilled out,
position rail cover onto the body tub and place soft-top mounting bracket onto Cover. Align rear
mounting holes for the bracket, cover, and body tub. Mark the front mounting hole and drill 2nd hole.
Check the fit of soft-top hardware and follow steps (1-4) listed for part number (11650.41).

Instructions for (11650.41) 1997-2006 Standard TJ with Bestop Supertop

Advertising