Rugged Ridge 3-Inch Round Tube Side Steps, Stainless, 07-14 Wrangler Unlimited (JK) User Manual
Page 2
Advertising
5. Install the black round 6MM Allen head bolts and 6MM Flat Washer through the front
of rocker panel lip (Fig 3) for all three mounting plates. Secure with a 6MM Flat
Washer, 6MM Lock Washer, and a 6MM Nylock Nut. Do Not Tighten At This Time
6. Place the bar on the brackets and install the 8MM bolts and lock washers (Fig 4)
7. Align the bar and tighten all the fasteners (Fig 5) and torque to 30ft-lbs
8. Repeat operation on other side.
Fig 3
Fig 4
Fig 5
Advertising