Rugged Ridge Euro Tail Light Guards, Titanium, 76-06 Jeep CJ & Wrangler User Manual
Page 2
Installation Instructions
8660 (11226.01) Black and 11103.02 Stainless Steel
866009 (11301.01) Titanium
Euro Tail Light Guard 76-06 CJ/Wrangler
Step 7: Guide the tail light wiring through the new Euro
Tail Light Guard.
Step 8: Re-connect the wiring connectors and guide the
wiring back into the body.
Step 9: Reinstall the tail light assembly and
Euro Tail Light Guard to the original
mounting holes using the new bolts
provided.
Step 10: Carefully guide the taillight lens
back on to the tail light housing.
Step 11: Reinstall the four screws removed in step 1.
Caution: Be careful not to over tighten these
screws. Over tightening will crack
the lens.
Step 12: Repeat steps 1-11 for the opposite side.
Step 13: Check tail light operation. Installation of your
New Euro Tail Light Guards is now complete.
Page 2 of 2