Rugged Ridge Bumper Mounted Light Bar, Stainless Steel, 07-14 Jeep Wrangler (JK) - Manual (Page 2)

3. Use the M8 Button Head Bolts, M8 Flat Washers, and M8 Nylock Nuts to secure the Light Bar
to the Mounting Brackets. Install and tighten the lower bolts first, then install the upper ones.
Tighten to 20 ft-lbs.
Page 2 of 2
4. Tighten all hardware. Install lighting per manufacturer's instructions.
Rugged Ridge Limited Warranty
Applies to Rugged Ridge Products by Omix-ADA Inc.
Please find warranty card supplied with product for more information.
Warranty card should be filled out and returned to address listed below.
OMIX-ADA Inc.
460 Horizon Dr. Suite 400
Suwanee, Georgia 30024