Rugged Ridge 3-Inch Double Tube Front Bumper, 84-96 Jeep Cherokee (XJ) User Manual

Page 2

Advertising
background image

(Step 2)
With the bumper removed disconnect any lights and or wiring that might be attached
to the original bumper.

(Step 3)
With the original bumper removed make sure that the two front c-nut clips are in place on both
sides of the sub-frame. With the help of another person install the new tube bumper into place.
Some force may be needed to fit bumper snug to the vehicles sub-frame assemble. With the help
of a scribe or Phillips head screw driver align the mounting holes in the bumper brackets with the
sub-frame mounting points.

(step 4)
Reinstall original 15mm bolts and torque
to 45ft-lbs. Making sure the bumper is
aligned correctly as the bolts are tighten.

Advertising