Rugged Ridge Rear Spare Tire Light Mount For Rear Mounted Spare Tires - Manual (Page 2)

Page 2 of 2
11217.02 Spare Tire Light/Licence Place Relocation
3. Install Light Bracket into the Universal Plate and insert
the Clevis Pin. Be sure Safety Catch is looped over the pin
for retention.
Note: The light bracket can be rotated 180° depending on
your needs.
4. Install your choice of light. If license plate relocation is
desired, place License Plate Bracket between light and
the Light Bracket. Make sure to tighten securely.
Note: If not using a light, use supplied M12 bolt, washer,
and nylon lock nut to secure the License Plate Bracket to the
assembly.
5. If using the Licence Plate Bracket, use the supplied
M6 bolt, washer, and nylon lock nut to attach the license
plate to the License Plate Bracket
For assistance, please contact Omix-ADA Technical Support Department
(770) 614-6101
[email protected]
© Copyright 2012, Omix-Ada
REV: 6/8/12 CVB