Rugged Ridge Tube Doors, Locking, 97-06 Jeep Wrangler (TJ) User Manual

Page 3

Advertising
background image

1.

With tube doors installed, hold Anti-Rattle Bumper between the

door and vehicle door jamb. Close the door and adjust the location of

the bumper to achieve a snug fit. Mark the location of the Anti-Rattle

Bumper on the Tube Door using tape. Open door and mark the center

of the bumper with a center punch to prepare for drilling.

2.

Drill a 3/32” hole in the Tube Door and attach the bumper with

the supplied sheet metal screw. Do not overtighten. The attachment

screw can be loosened or tightened as necessary to adjust the length

of the Anti-Rattle Bumper.

OPTIONAL RUBBER BUMPER INSTALLATION

After installing Tube Doors, optional Anti-Rattle Bumpers can be installed.

Page 3 of 3

For assistance, please contact Omix-ADA Technical Support department

(770) 614-6101

[email protected]

© Copyright 2011, Omix-Ada

Advertising