Optional painting instructions, Chevy silverado all terrain flare kit – Rugged Ridge All Terrain Fender Flares, 07-11 Chevy 1500, 2500HD, 3500HD Trucks User Manual

Page 2

Advertising
background image

Optional Painting Instructions

Painting:

1. Apply two even coats of adhesion promoter to flares.

Allow recommended flash time between coats. Let second

coat dry for 15 minutes before primer application.

2. Apply an even coat of primer to flare surface. (A high

build primer is recommended)

3. Paint flares with a automotive grade paint. (A flex

additive must be added to paint)

Page 2 of 2

81630.20

5. Install the plastic tabs centered over the markings in step 4.

Install the u-clamps over the inner lip of the fender centered

over the tab. Install the flare using the supplied screws. Moderate

pressure against the flare may be needed for mounting holes to

align.

U-CLAMP

PHILLIPS

SCREW

PLASTIC

TAB

FLARE

VEHICLE

FENDER

Pain Preparation:

approved grease and wax remover.

Rev 7/21/10

Chevy Silverado All Terrain Flare Kit

Advertising