Rugged Ridge Fender Flare Kit, 11-14 Ford Super Duty Pickups User Manual

Page 2

Advertising
background image

Copyright © 2013 Omix-Ada

®

, Inc.

460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 770-614-6069 | [email protected]

All Terrain Flares 11-14 Ford F250/F350 Super Duty

3. Remove five factory installed screws with 7/32”
socket wrench. Save factory screws for reinstalla-
tion.

1. Install supplied bolts, washers, and locking nuts into
each flare.

2. Clean inside of top lip edge with rubbing alcohol.
Install edge trim by removing red vinyl tape covering
only a few inches at a time. Applying adhesive side
of edge trim to inner side of flare. Install edge trim to
the top edge of flare (the edge that contacts ve-
hicle). Do not stretch trim while being applied. Trim
excess from ends.

Page 2/5

81630.05

Inner Flare Surface

Washer

Bolt

Nut

Advertising