Rugged Ridge Ultimate II Locking Console, Spice, 76-95 Jeep CJ & Wrangler - Manual (Page 5)

CAUTION: Take care not to cut or trip any wires/lines that might be
in the area.
5. Secure the Console to the floor of the vehicle using the (2) 14 X 1 ¾”
Sheet Metal Screws provided.
6. Open the front most lockable storage lid to gain access to the front of
console. Drill one hole in the center and as far forward as possible through
the bottom of the Console and the floor of the vehicle using a 3/16” drill bit
(Figure 4).
7. Secure using (1) 14 X 1 ¾” Sheet Metal Screw provided.
NOTE: For the console to the floor support, you opt to install (2) 14 X 1
¾” Sheet Metal Screws instead of (1).
Ensure that all Screws are secure
Made in China