Rugged Ridge XHD Soft Top, Tan, Clear Windows, 97-06 Jeep Wrangler (TJ) User Manual
Page 4
S tep (3) : F lip the fabric over s o that it wraps
around the header and drape the top
fabric over the tailgate. R ais e the header
s lightly and work the pockets in the fabric
over the corners of the header. Ins tall an
oval head s crew in each corner to s ecure
the fabric to the header.
S tep (4) : R ais e the header and bow as s embly
towards the winds hield and into pos ition.
Ins ide the top, s nap the fabric to the
rear bow (total of s ix s naps ).
S tep (5) : Make s ure that the center bow is centered
in the hook and loop flap ins ide the top. Do
not fas ten the flap at this time.
P ull down gently on the rear bow and work
the plas tic s ewn to the rear corner of the
top into the retainer on the vehicle.
S tep (6) : C los e the header latches to s ecure the
front of the top to the winds hield. C atch
the hook in the s lot in the winds hield frame
and then clos e the lever over it s o that it
lays flat agains t the winds hield frame.
S tep (7) : W rap and fas ten the hook and loop on the
two flaps ins ide the top around the center
bow.
P g.4