Rugged Ridge Heavy Duty 10,500 lbs Off Road Winch - Manual (Page 4)

VEHICLE RECOVERY ELECTRIC WINCH USE & INSTALLATION INSTRUCTIONS
4
Loosen the  screws on the right side of Solenoid Box and insert into corresponding holes in Mounting
Bracket, sliding them over to smaller portion of mounting bracket holes. Tighten screws.
C.
A.
To mount Solenoid Box over spool:
Angled Bracket
Hardware
Select the appropriate bracket hardware for your installation. Rugged Ridge ® supplies two over spool
mounting options. Depending on your bumper, winch plate, or application, you will need to determine
which bracket choice to use. The angled bracket allows the solenoid to be angled forward to ensure proper
clearance of plug for hand controller relative to bumper overriders or stinger applications.
Configure & attach brackets as shown for mounting of Solenoid Box over spool.
B.
Horizontal Mount Angled Mount
Horizontal Bracket
Hardware
Solenoid Mounted Over Spool Choose Correct Bracket for Your application
Front of Solenoid Box Front of Solenoid Box