Rivera Primo SU Rebuild - Manual

SU Eliminator II Rebuild Instructions
1 2
3
7
8
4
5
6
9
10
11
Assembly
Start with a cleaned, disas-
sembled SU body.
Install Piston Lift Pin Spring.
Place Idle Speed screw in hole
on left side rear.
Main Jet Adjusting Screw with
oring installed.
Install Idle Speed screw with
blade type screwdriver.
Put Main Jet Adjusting Screw
in hole on RS lower front.
Install Piston lift Pin from into
top of the body.
Install Piston Lift Pin circlip.
Install oring on Idle Speed
Screw..
Place oring on Main Jet Ad-
justing Screw.
Piston Lift Pin Installed.
RIVERA PRIMO INC.
12450 WHITTIER BLVD.
WHITTIER, CA 90602
562-907-2600
562-907-2606
www.riveraprimoinc.com
[email protected]
Left Side
of SU (LS)
RS
1108-0053