Rivera Primo SU Rebuild User Manual
Page 3
Advertising
24
25
26
29
33
31
30
28
27
34
32
35
Install spring on Choke Body.
Line up spring coils close to
Choke Body.
Bend lock tabs to secure nut.
Install lock tab.
Choke Cam Lever fully in-
stalled.
Locate spring on Choke Cam
Lever.
Choke Cam Lever & spring in
place.
Install nut and tighten.
Install Choke Cam Lever.
NOTE: Be sure that the Throttle shaft moves freely in the carb body prior to installing the Throttle
Disc.
Spray a little WD on Throttle
Shaft prior to installing.
Align Throttle Shaft with Shaft
hole in body.
Slide Throttle Shaft through
both shaft holes in body.
Advertising