Comfort-Aire PSH-141A User Manual

Page 14

Advertising
background image

14

Installation, Operation & Maintenance

PSH-141A

Heat Controller, Inc.

CARE AND MAINTENANCE

CARE AND MAINTENANCE

1) Be sure to unplug the unit before cleaning or servicing.

2) Do not use gasoline, paint thinner or other chemicals to clean

the unit.

3) Do not wash the unit directly under a tap or using a hose.

It may cause electrical danger.

4) If the power cord is damaged, it should be repaired by

an authorized servicer.

IMPORTANT:

1. Air filter

2. Unit Cabinet

- Use a lint-free damp cloth with neutral detergent to clean

the cabinet. Finished by drying with a clean, dry cloth.

Fig.21

3. Unit storage when not in use

- Remove the rubber plug at the back of the unit and attach

a hose to the drain outlet

. Place the open end of the hose

directly over the drain area in your basement floor

(See Fig.18 & 19).

- Remove the plug from the bottom drain outlet, all the water

in the bottom tray will drain out (See Fig.21).

- Keep the appliance running in FAN mode for half a day in

a warm room to dry the appliance inside and prevent mold

from forming.

- Stop the appliance and unplug it, wrapped the cord and

bundle it with the buckle and plug the power plug into the

socket on the back of the unit. (Fig.23). Remove the batteries

from the remote controller.

- Clean the air filter and reinstall it.

- Unscrew the exhaust hose from the unit and pull out for

uninstallation (Fig.24).

Fig.22

Fig.23

Buckle

Power

cord

Upper filter

(take out)

Remove the

screw ,then

take the lower

filter out.

Upper filter

(install)

Install the lower

filter by using

the screw.

- Clean the air filter at least once every two weeks.

- Removal

This unit has two filters. Take the upper filter out along the

the arrow direction (Fig.21),then take the filter down.

Remove the lower filter by loosening the screw, taking out

the filter as shown in Fig.21.

- Cleaning

Wash the air filter by immersing it gently in warm water

O

O

(about 104 F/40 C) with a neutral detergent. Rinse the filter

and dry it in a shady place.

- Installation

Insert the upper air filter after cleaning, and reinstall the lower

filter by using the screw (see Fig.22).

Power plug

socket

Power plug

Fig.24

Advertising