SawStop 3.0HP - Manual (Page 27)

SawStop 10” Professional Cabinet Saw 25
Assembling Y
our
Saw
Congratulations, your saw is now assembled.
Note: You must install a rip fence prior to using the saw. Refer to the manual
accompanying your rip fence for instructions on how to install the fence.
Fig. 36
Assembling Your Saw
sloped ridges guide limit rod
until it snaps into place
push down on limit rod
until it snaps into place
wood stop
“V” tip points
downward
Apply downward pressure to the limit rod at the sloped ridges on each side of the blade guard until the limit rod
snaps into place (see Fig. 36).