Muxlab HDMI 4×4 Matrix Switch Kit, HDBT, PoE - Manual (Page 38)

© MuxLab Inc. HDMI 4x4 Matrix Switch, HDBT Installation Guide
Page 38
5. Get (Continued)
get -o
Description: Get the connection state of all output ports
Arguments: <none>
Example: Get connection state of all output ports
get -o
Response: Output 01 connected to: 03
Output 02 connected to: 04
Output 03 connected to: none
…{and so on}
(or an error message if the command failed)
6. Help
help or ?
Description: Display all the command list definition available
Arguments: <none>
Example: Display all the command list
help
?
Response: connect
connect –i <input port #> -o <output port #> {Connect 1 input port to 1 output port}
connect -i <input port #> -o all {Connect 1 input port to all output port}
connect -i <input port #> -o <from output port #>..<to output port #> {Connect 1 input port to a specific range of output
port}
disconnect
disconnect -i <input port #> {Disconnect 1 input port}
disconnect -o <output port #> {Disconnect 1 output port}
disconnect -all {Disconnect all input/output port}
… {and so on}
version
version <no parameters> {Get the current firmware version}