ADTRAN IP 501 - Manual (Page 6)

Place a Call Pick up handset or press the Speakerphone
button. Enter the desired number or enter the number on
the keypad. Then press the Dial soft (key).
Answer a Call Pick up the handset, press the Answer soft
key, or the Speakerphone button.
Hold Once a call is established, press the Hold button
(or Hold soft key) to place the caller on hold. To retrieve
a held call, press the Hold button, Resume soft key, or
the line key.
Mute While a call is active, press the Mute button to mute
the audio you are sending to the other party. Press the Mute
button again to un-mute.
Unattended Transfer Once a call is established, press the
Transfer key or Trnsfer soft key and enter the target’s extension.
Once the phone starts ringing, press the Transfer key (or
Trnsfer soft key) again to complete the transfer, or simply
hang up to complete the transfer.
Attended Transfer Once a call is established, press the
Transfer key or Trnsfer soft key and enter the target’s
extension. Once the target has answered, announce the
caller then press the Transfer key (or Trnsfer soft key) to
complete the transfer or hang up.
Blind Transfer Once a call is established, press the Transfer
key or Trnsfer soft key, then the Blind soft key and enter the
target extension.
Park Call Once a call is established, press the More soft key,
then press Park, enter a Park Zone number (0 to 9), then press
the Park button again or use the Park Zone Busy Lamp Field (BLF).
Retrieve Parked Call Obtain dial tone. Press the Pickup
soft key, enter the Park Zone number (0-9), and then press
the Rtrieve soft key to pickup the call.
Page Obtain dial tone. Dial overhead paging extension or
SPRE code (________). Page the party, then hang up.
Conference (Three-Way) While on a call, press the
Conference button (or select the More soft key, then press
the Confrnc soft key), and dial the third-party’s extension.
Once the party has answered, press the Conference button
(or the Confrnc soft key) again to connect the parties.
Forward Call Press the Forward soft key. Enter the
destination extension (or outside number), and then
press the Enable soft key. When enabled, all incoming
calls will be re-directed to the forwarded extension
or number.
6
Phone Feature Quick Reference Guide