Nippon Aviotronics Multi-Function LCD Projector MP-50E - Manual (Page 3)

E-3
Warnings and Safety Precautions
● Warning Symbols
To alert the user to important safety precautions, the following symbols are used
in this manual and on the product. Make sure you understand what these sym-
bols mean before operating the projector.
WARNING
: Death or serious injury may result if this warning is ignored.
CAUTION
: Injury or damage to the equipment may result if this warning is
ignored.
NOTE : This indicates an item that you should take care of when handling
your projector.
: This symbol alerts the user to high voltage that could cause electric
shock.
● Safety Precautions
WARNING
• If a fault occurs:
• If you detect smoke, or a strange smell or sound, immediately disconnect the
power cord.
It is dangerous to continue using the projector after a fault occurs. Return the
projector to the dealer where it was purchased for repair.
• Avoid placing the projector near dangerous substances.
• Make sure that no metallic or flammable material can get into the projector
through the air vents.
• Do not place any objects containing water on top of or next to the projector.
• If foreign matter gets inside the projector:
• If foreign matter such as water or metal gets inside, immediately disconnect
the power cord.
It is dangerous to continue using the projector when foreign matter gets
inside. Return the projector to the dealer where it was purchased for servic-
ing.
• Do not remove the cabinet.
• Do not remove the cabinet. There are high-voltage components inside and
touching these parts could cause electric shock, or damage the equipment.
• Handle the power cade safely.
• Do not place any heavy objects on top of the power cord.
Damage to the power cord can cause wire breakage, fire, or electric shock.
• Do not pull the power cord when disconnecting the power plug.
Pulling the cable may break the wires or cause fire or electric shock. Always
hold the plug itself when pulling it out of the power outlet.
• Do not damage the power cable. If the power cord is damaged (e.g. the core
is exposed or cut), contact the sales office of purchase.(charged) it could
cause fire or electric shock if you continue using the damaged power cord.