HiVi Bedienungsanleitung User Manual
Page 3
SWANS Europe
3 von 4
3. Connection
of
loudspeakers
SWANS loudspeakers are created as standard (Fig. 2) or with Bi-wiring terminals (Fig. 3)
dependent on the each model.
With Bi-wiring terminals is it possible to set-up the speakers in 3 different variations for
connection. The differences of the configurations result in 3 kind of sound performances.
Bi-Wiring: (Option 1)
The amplifier is connected with two speaker cables (high and low frequencies are
separated) with the loudspeakers. (Fig. 3.1)
Bi-wiring/Bi-amplified: (Option 2)
Several amplifiers are connected over separate cables with the loudspeaker
chassis. (Fig. 3.2)
BI- Wiring:
+
-
+
-
Fig. 2
Amplifier
H
T
+
-
Fig. 3.1
Amplifier
+
-
H
T
+
-
Fig. 3.2
Amplifier II
+
-
Amplifier I