Kramer Electronics VM-114H2C - Manual (Page 16)

VM-114H2C - Operating the VM-114H2C 13
5.3.4 IR Local Control and Pass-Through Example 2
The configuration is shown in Figure 5 .
Figure 5: VM-114H2C IR Control and Pass-Through Example 2

An IR sensor is connected to the TP-573 transmitter.

An LCD display is connected to the TP-574 receiver via an IR emitter.

Both the TP-573 and the TP-574 are connected to the VM-114H2C via TP
cabling.
Point the LCD display remote control either at the TP-573 IR sensor or at the
VM-114H2C IR sensor to control the LCD display. Point the Kramer remote control
at the VM-114H2C IR sensor to control the VM-114H2C.