Kramer Electronics tp-219hd - Manual (Page 13)

Connecting the TP-219HD and TP-220HD
11
5.1 Connecting an HD System
When connecting a high definition source, as illustrated in Figure 6 , use a
breakout cable such as the Kramer C-GM/3RVF. If you have a VGA to a
5BNC cable, use the RGB wires only.
Figure 6: Connecting an HD Source
You can also connect an HD acceptor (for example, a plasma display) using
the same PINOUT.
5.2 Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors
Table 5 and Figure 7 define the UTP CAT 5 PINOUT, using a straight pin
to pin cable with RJ-45 connectors:
Table 5: CAT 5 PINOUT Figure 7: CAT 5 PINOUT
EIA /TIA 568A EIA /TIA 568B
PIN Wire Color PIN Wire Color
1 Green / White 1 Orange / White
2 Green 2 Orange
3 Orange / White 3 Green / White
4 Blue 4 Blue
5 Blue / White 5 Blue / White
6 Orange 6 Green
7 Brown / White 7 Brown / White
8 Brown 8 Brown
Pair 1 4 and 5 Pair 1 4 and 5
Pair 2 3 and 6 Pair 2 1 and 2
Pair 3 1 and 2 Pair 3 3 and 6
Pair 4 7 and 8 Pair 4 7 and 8
Set Top Box
Source
PIN #
1 Pr
Y
Pb
2
3
Signal
XGA Connector PINOUT
TP-219HD
XGA/HD
Line
Transmitter/Switcher
I
2
NPU
T
I NPUT
1
L
O
INE
UT