Kramer Electronics SID-X1 - Manual (Page 10)

SID-X1 - Connecting the SID-X1 7
7
5 Connecting the SID-X1
Switch off the power to all devices before connecting them to your
SID-X1. After connecting your SID-X1 connect the power to other
devices.
Figure 3: Connecting the SID-X1 Step-in Commander
To connect the SID-X1 and the as illustrated in Figure 3 :
1. Connect up to four video sources (HDMI, DisplayPort, DVI and PC graphics)
to the video input connectors.
Note: If only one live input is connected, the device automatically detects
the live channel and activates it.
i