2 kramer protocol 3000 commands, Kramer protocol 3000 commands, Section – Kramer Electronics SID-X2N User Manual

Page 29

Advertising
background image

SID-X2N - Protocol 3000

25

25

12.2

Kramer Protocol 3000 Commands

The following table lists the Protocol 3000 commands that the SID-X2N supports.

For a full description of the commands, see the Kramer Protocol 3000 document

available from

http://www.kramerelectronics.com

.

Note: The SID-X2N can only receive commands from a device, (for example, an

HDBT receiver) via the HDBaseT link, and only at 9600bps.

Command

Description

#

Protocol handshaking

MODEL?

Read device model

VID

set video switch status

VID?

Get video switch status

Advertising
See also other documents in the category Kramer Electronics Accessories for electrical: